110060 Hytec UniForce Hydraulic Clamp, 290 LB. Force 2500 PSI UPC #662536375214

110060 Hytec UniForce Hydraulic Clamp, 290 LB. Force 2500 PSI UPC #662536375214

110062 Hytec UniForce Hydraulic Clamp, 1500 LB. Force 2500 PSI UPC #662536375238 - Dimensions

110062 Hytec UniForce Hydraulic Clamp, 1500 LB. Force 2500 PSI UPC #662536375238

110061 Hytec UniForce Hydraulic Clamp, 1500 LB. Force 5000 PSI UPC #662536375221

Part #110061 UniForce Hydraulic Clamp, 1500 LB. Force 5000 PSI, Single Acting, Spring Return, rod wiper excludes contaminants.
Special Price $254.49 was $285.14
SKU
110061
110061 Hytec UniForce Hydraulic Clamp, 1500 LB. Force 5000 PSI UPC #662536375221 is available to buy in increments of 1

Part #110061 Hytec UniForce Hydraulic Clamp

 

These clamps are a combination of Mitee-Bite® Products Uniforce® Clamp and Hytec’s cartridge pull cylinders. Two pull cylinders are offered to power each of five of the most popular Uniforce clamps. One will create the force necessary to achieve the clamp’s rated force at 5,000 psi hydraulic pressure. The other powers the clamp to its maximum rating at only 2,500 psi. This allows the efficient use of these clamps in lower pressure systems however, never exceed the maximum pressure rating of the clamp/cylinder assembly.

The pull cylinders are designed for cartridge mounting in a cavity supplied by the fixture builder. The required cavity is simply a cylindrical bore with a properly deburred pressure port intersecting it, providing the fluid connection. Where possible, pins inserted in the back of the piston are provided. These pins can be guided by holes drilled in the sub-plate to prevent cylinder rotation when adjustments are made. A breather hole should always be provided and may be combined with the pin holes where appropriate.

An external stop prevents over-travel of the clamp if actuated without a workpiece in place.

These clamps are a combination of Mitee-Bite® Products Uniforce® Clamp and Hytec’s cartridge pull cylinders. Two pull cylinders are offered to power each of five of the most popular Uniforce clamps. One will create the force necessary to achieve the clamp’s rated force at 5,000 psi hydraulic pressure. The other powers the clamp to its maximum rating at only 2,500 psi. This allows the efficient use of these clamps in lower pressure systems however, never exceed the maximum pressure rating of the clamp/cylinder assembly.

The pull cylinders are designed for cartridge mounting in a cavity supplied by the fixture builder. The required cavity is simply a cylindrical bore with a properly deburred pressure port intersecting it, providing the fluid connection. Where possible, pins inserted in the back of the piston are provided. These pins can be guided by holes drilled in the sub-plate to prevent cylinder rotation when adjustments are made. A breather hole should always be provided and may be combined with the pin holes where appropriate.

An external stop prevents over-travel of the clamp if actuated without a workpiece in place.

 

Features:

  • Minimal space requirements
  • Reduces repetitive motion injuries
  • 5,000 psi and 2,500 psi maximum versions
  • Cylinders require no additional fixture space
  • Rod wiper excludes contaminants
  • Plating & Power-Tech™ processes resist corrosion
  • Single-acting, spring return

Mitee-Bite and Uniforce are registered trademarks of Mitee-Bite Products Company.

 


Clamp & Cylinder Assembly
Order No.
Clamp Assembly Specifications Cylinder Specifications
Operating
Pressure
Max.
(psi)
Holding
Force
Max.
(lbs.)
Clamp
Spread
Max.
Stroke
(in.)
Eff. Area
(sq. in.)
Oil Cap.
(cu. in.)
110061 5,000 1,500 0.830 0.178 0.353 0.063

 

 

Cylinder Dimensions (in Inches)
Order No. A B C D E
Piston Thread
Size Depth
110061 1.240 1.325 0.560 1.185 1/4-20 UNC 0.375

 

Uniforce Clamp Dimensions (in Inches)
Clamp & Cylinder
Assembly
Order No.
F G H J K
Cap Screw
L M
C'Bore
Depth
Uniforce
Clamp
(only)
Order No.
Thd Size Length
110061 0.790 0.375 0.635 0.735 1/4-20 UNC 0.875 0.940 0.255 500185
More Information
Product Availability Intermittent stocking item, call for specific ship date. Please note, we go into production on some items as soon as we receive your order. It is highly recommended that you place your order as soon as possible.
Manufacturer SPX Hytec
Write Your Own Review
You're reviewing:110061 Hytec UniForce Hydraulic Clamp, 1500 LB. Force 5000 PSI UPC #662536375221
More from SPX Hytec