110135 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536391825
Part #110135 Hytec Air Advance Work Supports 7,500 lbs. Capacity
Similar in operation to our other air advance work supports, Hytec’s 7,500 lb. work supports‘ unique interlocking pin design gives more holding capacity than other units of similar size.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Air advance work supports may be specified in applications whenever the workpiece is loaded from the side and the extended plunger from a spring advance work support would be in the way, or the workpiece is not heavy enough to depress a spring advance work support plunger, or the plunger contact force must be precisely adjusted and controlled. Adjusting the air supply pressure will vary the workpiece contact force.
Features:
- Air advance
- 7,500 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Sealed against contamination
- Convenient dual air inlets allow easy connection and chaining of work supports
Note:
See Crowned Threaded Inserts
See Air Inlet Adapter Fitting
Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
110135 | 7,500 | 0.250 | Air | Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | |||||
A Retract Operating Range |
B Advance Operating Range |
C | D | O | P Air Inlet Port |
|
110135 | 3.435 | 5.615 | 4.227 | 3.875 | 0.830 | **G 1/8-28 |
NOTE: ** Per ISO 1179 *** Per ISO 6149-1. |
Order No. |
Dimensions (In Inches) | ||||
E | G Dia. |
L | R Port |
S Flats |
|
110135 | 3.250 | 0.500 | 2.000 | ***M12 x 1.6 6H | 0.875 |
NOTE: ** Per ISO 1179 *** Per ISO 6149-1. |
Order No. |
Dimensions (In Inches) | |||||||
F | H | J | K | M | N | Q | ||
Size | Depth | |||||||
110135 | 0.875 | 0.438 | 0.875 | 0.625 | ***M12 x 1.5 6H | 0.580 | 1.750 | 0.406 |
NOTE: ** Per ISO 1179 *** Per ISO 6149-1. |
AIR ADVANCE WORK SUPPORT | ||
Order No. |
Approximate Plunger Extension Force |
|
Air Pressure * (psi) |
Force (lbs.) |
|
110135 | 100 | 49.0 |
NOTE: * Min. air pressure 25 psi, maximum air pressure 100 psi. |
Manufacturer | SPX Hytec |
---|
-
110101 Hytec Swing Clamps, Block, Right, Force 1,610LB. UPC #662536377973Special Price $1,766.56 was $1,984.90
-
110104 Hytec Swing Clamps, Block, Left, Force 3,780LB UPC #662536378000Special Price $2,030.26 was $2,281.19
-
100900 Hytec Swing Clamps Threaded Body Style 5000 lbs. UPC #662536277228Special Price $813.60 was $911.60
-
110102 Hytec Swing Clamps, Block, Left, Force 1,610LB. UPC #662536377980Special Price $2,136.89 was $2,401.00
-
100986 Hytec Edge Clamps UPC #662536339438Special Price $518.34 was $582.40
-
100898 Hytec Swing Clamps Threaded Body Style 5000 lbs. UPC #662536277167Special Price $1,035.34 was $1,163.30
-
110103 Hytec Swing Clamps, Block, Right, Force 3,780LB. UPC #662536377997Special Price $1,896.15 was $2,130.50