110087 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536364959
Part #110087 Hytec Air Advance Work Supports 7,500 lbs. Capacity
Similar in operation to our other air advance work supports, Hytec’s 7,500 lb. work supports‘ unique interlocking pin design gives more holding capacity than other units of similar size.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Air advance work supports may be specified in applications whenever the workpiece is loaded from the side and the extended plunger from a spring advance work support would be in the way, or the workpiece is not heavy enough to depress a spring advance work support plunger, or the plunger contact force must be precisely adjusted and controlled. Adjusting the air supply pressure will vary the workpiece contact force.
Features:
- Air advance
- 7,500 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Sealed against contamination
- Convenient dual air inlets allow easy connection and chaining of work supports
Note:
See Crowned Threaded Inserts
See Air Inlet Adapter Fitting
Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
110087 | 7,500 | 0.250 | Air | Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | |||||
A Retract Operating Range |
B Advance Operating Range |
C | D | O | P Air Inlet Port |
|
110087 | 3.435 | 4.185 | 3.500 | 3.875 | 0.830 | 1/16 NPTF |
Order No. |
Dimensions (In Inches) | ||||
E | G Dia. |
L | R Port |
S Flats |
|
110087 | 3.250 | 0.500 | 1.500 | 7/16-20 UNF SAE-4 |
0.875 |
Order No. |
Dimensions (In Inches) | |||||||
F | H | J | K | M | N | Q | ||
Size | Depth | |||||||
110087 | 0.875 | 0.438 | 0.875 | 0.625 | 1/2-13 UNC | 0.625 | 1.750 | 0.406 |
AIR ADVANCE WORK SUPPORT | ||
Order No. |
Approximate Plunger Extension Force |
|
Air Pressure * (psi) |
Force (lbs.) |
|
110087 | 70 | 33.0 |
NOTE: * Min. air pressure 25 psi, maximum air pressure 100 psi. |
Manufacturer | SPX Hytec |
---|
-
100871 Hytec Swing/Pull Clamps -Threaded Body Style -2400 lbs - Bolt UPC#662536229784Special Price $808.87 was $906.30
-
100842 Hytec Swing/Pull Clamps -Threaded Body Style -2400 lbs - Bolt UPC#662536141109Special Price $889.56 was $999.50
-
100990 Hytec Swing/Pull Clamps Double-Acting Cartridge Style 5000 lbs UPC #662536356947Special Price $1,215.30 was $1,365.50
-
100849 Hytec Swing/Pull Clamps -Threaded Body Style -2400 lbs - Bolt UPC#662536141185Special Price $998.05 was $1,121.40
-
100863 Hytec Edge Clamps UPC #662536217842Special Price $567.91 was $638.10
-
100870 Hytec Swing/Pull Clamps -Threaded Body Style -2400 lbs - Bolt UPC#662536229777Special Price $892.58 was $1,002.90
-
100841 Hytec Swing/Pull Clamps -Threaded Body Style -2400 lbs - Bolt UPC#662536141093Special Price $889.56 was $999.50