110134 Hytec Work Supports, Spring, 1,300 lbs. Capacity UPC #662536391818.jpg

110134 Hytec Work Supports, Spring, 1,300 lbs. Capacity UPC #662536391818

110087 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536364959 Top View.jpg

110087 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536364959

100844 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536141116

Part #100844 Air Advance Work Supports 7,500 lbs. Capacity, Air advance, Single-acting, Sealed against contamination, Convenient dual air inlets allow easy connection and chaining of work supports.
$0.00
SKU
100844

Part #100844 Air Advance Work Supports 7,500 lbs. Capacity

 

Similar in operation to our other air advance work supports, Hytec’s 7,500 lb. work supports‘ unique interlocking pin design gives more holding capacity than other units of similar size.

The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.

Air advance work supports may be specified in applications whenever the workpiece is loaded from the side and the extended plunger from a spring advance work support would be in the way, or the workpiece is not heavy enough to depress a spring advance work support plunger, or the plunger contact force must be precisely adjusted and controlled. Adjusting the air supply pressure will vary the workpiece contact force.

Features:

  • Air advance
  • 7,500 lb. rated capacity at 5,000 psi maximum
  • Single-acting
  • Sealed against contamination
  • Convenient dual air inlets allow easy connection and chaining of work supports


Note:
See Crowned Threaded Inserts
See Air Inlet Adapter Fitting

 

Order
No.
Cap. *
(lbs.)
Oil Cap.
(cu. in.)
Advance
System
Mounting
Configuration
100844 7,500 0.250 Air Conventional
* Based on 5,000 psi maximum operating pressure

 

Order
No.
Dimensions (In Inches)
A
Retract
Operating
Range
B
Advance
Operating
Range
C D O P
Air Inlet
Port
100844 3.435 4.185 3.500 3.875 0.830 1/16 NPTF

 

 

Order
No.
Dimensions (In Inches)
E G
Dia.
L R
Port
S
Flats
100844 3.250 0.500 1.500 1/4 NPTF 0.875

 

Order
No.
Dimensions (In Inches)
F H J K M N Q
Size Depth
100844 0.875 0.438 0.875 0.625 1/2-13 UNC 0.625 1.750 0.406

 

AIR ADVANCE WORK SUPPORT
Order
No.
Approximate Plunger
Extension Force
Air Pressure *
(psi)
Force
(lbs.)
100844 30 8.0
NOTE: * Min. air pressure 25 psi, maximum air pressure 100 psi.
More Information
Manufacturer SPX Hytec
Write Your Own Review
You're reviewing:100844 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536141116
More from SPX Hytec