110124 Hytec Work Supports, Spring, 1,300 lbs. Capacity UPC #662536372015
Part #110124 Work Supports, Spring, 1,300 lbs. Capacity
Hytec’s spring advance work supports have a spring loaded plunger which contacts the workpiece as it is loaded into the fixture. The spring keeps the plunger in contact with the workpiece, allowing for variations between workpieces. To support any externally supplied loads, the sleeve surrounding the poppet grips the plunger and holds it in place.
The 100874 and 110124’s threaded body may be compactly manifold mounted in your fixture or choose the 100875 or metric version 110134 which includes the 100874 work support and a mounting base for installation on a flat surface for conventionally plumbed circuits. Both feature fully corrosion resistant construction.
Extremely close manufacturing tolerances hold the plunger perpendicular to the workpiece and eliminates inaccuracies due to plunger movement during lock-up. After lock-up, the plunger is absolutely rigid and limits elastic deflection to 0.00007" per 100 lbs. of load. For base only, order number 500035 for conventional mounting, and 421727 for manifold mounting.
Features:
- 1,300 lbs. capacity @ 5,000 psi maximum
- Fully corrosion resistant construction
- Manifold mount or conventional base mounting
- Filtered breather/rest button
- 1,000 psi minimum recommended pressure
Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
110124 | 1,300 | 0.01 | Spring | Base Manifold |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Mounting Dimensions (In Inches) | ||||||
AA Thread Size |
BB Min. Thread |
CC | DD Dia. |
EE Drill Point Dia. Max. |
FF Dia. |
GG Max. |
|
110124 | - | - | - | - | - | - | - |
Order No. |
Mounting Dimensions (In Inches) | |||||
HH | JJ | KK Thread Size |
LL | MM | NN Pressure Port Dia. Max. |
|
110124 | 1.968 | 1.188 | 1/4 - 20 UNC | 1.456 | 0.594 | 0.126 ††† |
NOTE: ††† Surface finish to be 63. Finish of 125 acceptable with concentric tool marks only. Finish area to be 0.438 dia. min. centered on 0.126 dia. port hole. See operating instructions for additional details. |
FLUID ADVANCE WORK SUPPORT | ||
Order No. |
Approximate Forces Required To Depress Plunger (lbs.) |
|
Fully Extended |
Fully Depressed |
|
110124 | 2.3 | 2.9 |
Manufacturer | SPX Hytec |
---|
-
100951 Hytec Swing/Pull Clamps - Cartridge Style - 750 lbs UPC#662536293143Special Price $624.78 was $702.00
-
100946 Hytec Swing/Pull Clamps - Threaded Body Style - 750 lbs UPC#662536296113Special Price $624.77 was $701.99
-
100957 Hytec Swing/Pull Clamps - Cartridge Style - 750 lbs UPC#662536296212Special Price $644.45 was $724.10
-
100952 Hytec Swing/Pull Clamps - Cartridge Style - 750 lbs UPC#662536296182Special Price $624.78 was $702.00
-
100953 Hytec Swing/Pull Clamps - Cartridge Style - 750 lbs UPC#662536296199Special Price $754.95 was $845.88
-
100950 Hytec Swing/Pull Clamps - Threaded Body Style - 750 lbs UPC#662536296175Special Price $729.40 was $817.26
-
100949 Hytec Swing/Pull Clamps - Threaded Body Style - 750 lbs UPC#662536296168Special Price $630.92 was $708.90