100177 Hytec Air Advance Work Supports - 2,100 lbs. Capacity UPC #662536005401
Part #100177 Hytec Air Advance Work Supports - 2,100 lbs. Capacity, Air advance, Single-acting, Manifold or conventionally mounted styles, Sealed against contamination.
Special Price
$535.46
was
$599.96
SKU
100177
100177 Hytec Air Advance Work Supports - 2,100 lbs. Capacity UPC #662536005401 is available to buy in increments of 1
Part #100177 Hytec Air Advance Work Supports - 2,100 lbs. Capacity
Work supports provide the stability that prevents deflection and vibration of the workpiece during machining. Automatically adjustable to varying sizes or positions of the workpieces, they are also usable as adjustable rest pads under clamps.
These 2,100 lb. air advanced work supports are available in three different models with either conventional or manifold mounting. All use plunger seals to protect against contamination.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Features:
- Air advance
- 2,100 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Manifold or conventionally mounted styles
- Sealed against contamination
Order No. | Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
100177 | 2,100 | 0.100 | Air | Manifold |
* Based on 5,000 psi maximum operating pressure |
Order No. | Dimensions (In Inches) |
|||
A Retract Operating Range |
B Advance Operating Range |
C | D | |
100177 | 2.250 | 2.625 | 2.250 | 3.862 |
Order No. | Dimensions (In Inches) | |
E | G Dia. |
|
100177 | 1.750 | 0.500 |
Order No. |
Dimensions (In Inches) | |||||
F | H | K |
M Thread |
R Dia. |
||
Size | Depth | |||||
100177 | 0.875 | 0.438 | 0.625 | 1/4-20 UNC | 0.312 | 0.281 |
Order No. | Dimensions (In Inches) | |||||
S | T | U |
V Thread |
W Dia. Air |
Y Dia. |
|
100177 | 2.937 | 0.876 | 0.625 | 1/4-20 UNC | 0.125 | 0.375 0.377 |
Order No. | Dimensions (In Inches) | |
Y | Z | |
100177 | 0.375 0.377 |
- |
AIR ADVANCE WORK SUPPORT | ||
Order No. | Approximate Forces Required To Depress Plunger (lbs.) |
|
Air Pressure * (psi) |
Force (lbs.) |
|
100177 | 30 | 2.2 |
NOTE: * Min. air pressure 25 psi, maximum air pressure 50 psi. |
Manufacturer | SPX Hytec |
---|
Write Your Own Review
More from SPX Hytec
-
350912 Hytec Swing-Pull Clamp Accessories UPC #662536162791Special Price $1,303.66 was $1,460.68
-
350914 Hytec Swing-Pull Clamp Accessories UPC #662536162814Special Price $132.45 was $148.40
-
205792 Hytec Fitting, 90° Male Elbow, Compression Tube to NPTF UPC #662536073707Special Price $26.88 was $30.20
-
252586 Hytec Fitting, Accumulator Metering Valve UPC #662536336079Special Price $196.69 was $221.00
-
253029 Hytec Fitting, Male Branch Tee UPC #662536109529Special Price $11.64 was $13.04
-
350913 Hytec Swing-Pull Clamp Accessories UPC #662536162807Special Price $66.32 was $74.31