100207 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity UPC#662536005623-Side View

100207 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity UPC#662536005623

100176-Hytec-Air-Advance-Work-Supports-2,100-lbs.-Capacity-UPC-#662536005395

100176 Hytec Air Advance Work Supports - 2,100 lbs. Capacity UPC #662536005395

100143 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity UPC#662536005319

Part #100143 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity, Rated capacity at 5,000 psi maximum, Single-acting, Manifold or conventionally mounted styles, Sealed against contamination.
Special Price $591.98 was $663.28
SKU
100143
100143 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity UPC#662536005319 is available to buy in increments of 1

Part #100143 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity

Hytec's 1,100 lb. capacity work supports use a boot attached between the body and plunger to effectively seal out contaminants. A diaphragm breather system further protects internal components, and the block style design requires only a flat surface for mounting rather than the large threaded hole needed with threaded body designs. Two mounting styles are available for plumbing convenience: manifold and conventional mount.

These work supports use a spring-loaded plunger to minimize deflection and vibration: As the workpiece is loaded into the fixture, it contacts the plunger, and its weight or the design of the fixture holds the plunger depressed. When the work support is hydraulically pressurized, the plunger is locked into position.

Features:

  • Spring advance
  • 1,100 lb. rated capacity at 5,000 psi maximum
  • Single-acting
  • Manifold or conventionally mounted styles
  • Sealed against contamination

 


Order No.
Cap. *
 (lbs.)          
Oil Cap.
(cu. in.)
Advance
System
Mounting
Configuration
100143 1,100 0.07 Spring Manifold
* Based on 5,000 psi maximum operating pressure

 

 


Order No.
Dimensions (In Inches)
C
100143 2.250

 


Order No.
Dimensions (In Inches)

A

Retract
Operating
Range

B

Advance
Operating
Range

E F G
100143 2.375 2.670 1.750 0.875 0.375

 

 


Order No.
Dimensions (In Inches)
D H J K  

M

Thread

        Size   Depth
100143 2.895 0.359 0.655 0.625 10-24 UNC 0.250

 

 


Order No.
SPRING ADVANCE WORK SUPPORT
Approximate Forces Required
To Depress Plunger (lbs.)
Fully
Extended   
Extended
50%   
Fully
Depressed
100143 1.0 1.4 1.8

 

More Information
Manufacturer SPX Hytec
Write Your Own Review
You're reviewing:100143 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity UPC#662536005319
More from SPX Hytec