100143 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity UPC#662536005319
Part #100143 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity
Hytec's 1,100 lb. capacity work supports use a boot attached between the body and plunger to effectively seal out contaminants. A diaphragm breather system further protects internal components, and the block style design requires only a flat surface for mounting rather than the large threaded hole needed with threaded body designs. Two mounting styles are available for plumbing convenience: manifold and conventional mount.
These work supports use a spring-loaded plunger to minimize deflection and vibration: As the workpiece is loaded into the fixture, it contacts the plunger, and its weight or the design of the fixture holds the plunger depressed. When the work support is hydraulically pressurized, the plunger is locked into position.
Features:
- Spring advance
- 1,100 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Manifold or conventionally mounted styles
- Sealed against contamination
Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
100143 | 1,100 | 0.07 | Spring | Manifold |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) |
C | |
100143 | 2.250 |
Order No. |
Dimensions (In Inches) | ||||
A Retract |
B Advance |
E | F | G | |
100143 | 2.375 | 2.670 | 1.750 | 0.875 | 0.375 |
Order No. |
Dimensions (In Inches) | |||||
D | H | J | K |
M Thread |
||
Size | Depth | |||||
100143 | 2.895 | 0.359 | 0.655 | 0.625 | 10-24 UNC | 0.250 |
Order No. |
SPRING ADVANCE WORK SUPPORT | ||
Approximate Forces Required To Depress Plunger (lbs.) |
|||
Fully Extended |
Extended 50% |
Fully Depressed |
|
100143 | 1.0 | 1.4 | 1.8 |
Manufacturer | SPX Hytec |
---|
-
100894 Hytec Swing Clamps Threaded Body Style 2400 lbs. Cap Screw UPC #662536273886Special Price $614.93 was $689.00
-
100889 Hytec Swing Clamps Threaded Body Style 2400 lbs. Cap Screw UPC #662536272254Special Price $738.52 was $829.80
-
100902 Hytec Swing Clamps Threaded Body Style 5000 lbs. UPC #662536277242Special Price $1,082.77 was $1,216.60
-
100891 Hytec Swing Clamps Threaded Body Style 2400 lbs. Cap Screw UPC #662536273862Special Price $628.18 was $703.84
-
100893 Hytec Swing Clamps Threaded Body Style 2400 lbs. Cap Screw UPC #662536273879Special Price $747.96 was $840.40
-
100892 Hytec Swing Clamps Threaded Body Style 2400 lbs. Cap Screw UPC #662536272278Special Price $747.96 was $840.40
-
100890 Hytec Swing Clamps Threaded Body Style 2400 lbs. Cap Screw UPC #662536273855Special Price $733.45 was $824.10