100207 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity UPC#662536005623
Part #100207 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity, Rated capacity at 5,000 psi maximum, Single-acting, Manifold or conventionally mounted styles, Sealed against contamination.
Special Price
$963.10
was
$1,079.10
SKU
100207
100207 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity UPC#662536005623 is available to buy in increments of 1
Part #100207 Hytec Spring Advance Work Supports - 1,100 lbs. Capacity
Hytec's 1,100 lb. capacity work supports use a boot attached between the body and plunger to effectively seal out contaminants. A diaphragm breather system further protects internal components, and the block style design requires only a flat surface for mounting rather than the large threaded hole needed with threaded body designs. Two mounting styles are available for plumbing convenience: manifold and conventional mount.
These work supports use a spring-loaded plunger to minimize deflection and vibration: As the workpiece is loaded into the fixture, it contacts the plunger, and its weight or the design of the fixture holds the plunger depressed. When the work support is hydraulically pressurized, the plunger is locked into position.
Features:
- Spring advance
- 1,100 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Manifold or conventionally mounted styles
- Sealed against contamination
Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
100207 | 1,100 | 0.07 | Spring | Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | |||
A Retract Operating Range |
B Advance Operating Range |
D |
N Hex. |
|
100207 | 2.375 | 2.670 | 2.500 | 1.500 |
Order No. |
Dimensions (In Inches) | |||||
C | E | G | L | X | ||
Thread Size |
Dia. | |||||
100207 | 2.250 | 1.750 | 0.375 | 1.375 | 1/8 NPTF | - |
Order No. |
Dimensions (In Inches) | ||||||
F | H | J | K |
M Thread
|
T Dia. |
||
Size | Depth | ||||||
100207 | 0.875 | 0.438 | 0.730 | 0.625 | 10-24 UNC | 0.250 | 0.281 |
Order No. |
SPRING ADVANCE WORK SUPPORT | ||
Approximate Forces Required To Depress Plunger (lbs.) |
|||
Fully Extended |
Extended 50% |
Fully Depressed |
|
100207 | 1.0 | 1.4 | 1.8 |
Manufacturer | SPX Hytec |
---|
Write Your Own Review
More from SPX Hytec
-
110151 Hytec Swing Clamp Surface Mount Externally Plumbed 365LB S/A RH Lower Flange Style UPC #662536401272Special Price $1,661.26 was $1,861.36
-
110118 Hytec Swing Clamp Surface Mount Externally Plumbed 2,400LB S/A S Lower Flange Style UPC #662536376686Special Price $764.41 was $856.48
-
110147 Hytec Swing Clamp 365LB D/A LH Lower Flange. UPC #662536401296Special Price $771.03 was $863.90
-
110149 Hytec Swing Clamp 365LB D/A S Lower Flange. UPC #662536401319Special Price $610.20 was $683.70
-
110119 Hytec Swing Clamp Surface Mount Externally Plumbed 2,400LB D/A LH Lower Flange Style UPC #662536376730Special Price $862.68 was $969.30
-
110144 Hytec Swing Clamp 365LB S/A LH Lower Flange. UPC #662536401234Special Price $771.98 was $864.96
-
110148 Hytec Swing Clamp 365LB D/A RH Lower Flange. UPC #662536401302Special Price $791.84 was $887.22