100874 Hytec Work Supports Spring Advance 1,300 lbs. Capacity UPC #662536236584
Part #100874 Hytec Work Supports Spring Advance 1,300 lbs. Capacity
Hytec’s spring advance work supports have a spring loaded plunger which contacts the workpiece as it is loaded into the fixture. The spring keeps the plunger in contact with the workpiece, allowing for variations between workpieces. To support any externally supplied loads, the sleeve surrounding the poppet grips the plunger and holds it in place.
The 100874 and 110124’s threaded body may be compactly manifold mounted in your fixture or choose the 100875 or metric version 110134 which includes the 100874 work support and a mounting base for installation on a flat surface for conventionally plumbed circuits. Both feature fully corrosion resistant construction.
Extremely close manufacturing tolerances hold the plunger perpendicular to the workpiece and eliminates inaccuracies due to plunger movement during lock-up. After lock-up, the plunger is absolutely rigid and limits elastic deflection to 0.00007" per 100 lbs. of load. For base only, order number 500035 for conventional mounting, and 421727 for manifold mounting.
Features:
- 1,300 lbs. capacity @ 5,000 psi maximum
- Fully corrosion resistant construction
- Manifold mount or conventional base mounting
- Filtered breather/rest button
- 1,000 psi minimum recommended pressure
Order NO. | Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
100874 | 1,300 | 0.01 | Spring | Cartridge Manifold |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | ||||
A | B † Seal Dia. |
C | D | E Hex. |
|
100874 | 1 1/4 - 16 UN | 1.171 | 0.334 | 1.531 | 1.125 |
Order No. |
|||||
F Hex. |
Operating Range | K | L Seal |
||
H | J | ||||
100874 | 0.735 | 2.850 | 3.162 | 2.180 | 0.040 |
Order No. |
Dimensions (In Inches) |
G Hex. |
|
100874 | 0.688 |
Order No. |
MANIFOLD MOUNT DETAIL | ||||||
AA Thread Size |
BB Min. Thread |
CC | DD Dia. |
EE Drill Point Dia. Max. |
FF Dia. |
GG Max. |
|
100874 | 1 1/4 - 16 UN | 0.300 | 0.665 0.675 |
1.182 1.196 |
0.343 | 0.121 0.135 |
0.060 |
NOTE: † Connector bushing supplied but not shown. |
Order No. |
MANIFOLD MOUNT DETAIL | |||||
HH | JJ | KK Thread Size |
LL | MM | NN Pressure Port Dia. Max. |
|
100874 | - | - | - | - | - | - |
NOTE: † Connector bushing supplied but not shown. |
AIR ADVANCE WORK SUPPORT |
||
Order No. |
Approximate Forces Required To Depress Plunger (lbs.) |
|
* Air Pressure (psi) | Force (lbs.) | |
100874 | 2.3 | 2.9 |
Manufacturer | SPX Hytec |
---|
-
110089 Hytec Swing Clamp 5000 lbs S/A LH Manifold Mount Lower Flange UPC #662536373814Special Price $964.97 was $1,081.20
-
110092 Hytec Swing Clamp 5000 lbs D/A LH Manifold Mount Lower Flange UPC #662536373845Special Price $1,229.80 was $1,381.80
-
110093 Hytec Swing Clamp 5000 lbs D/A RH Manifold Mount Lower Flange UPC #662536373838Special Price $1,229.80 was $1,381.80
-
110094 Hytec Swing Clamp 5000 lbs D/A S Manifold Mount Lower Flange UPC #662536373821Special Price $1,229.80 was $1,381.80
-
110091 Hytec Swing Clamp 5000 lbs S/A S Manifold Mount Lower Flange UPC #662536373784Special Price $858.58 was $961.99
-
110090 Hytec Swing Clamp 5000 lbs S/A RH Manifold Mount Lower Flange UPC #662536373791Special Price $964.97 was $1,081.20
-
110095 Hytec Swing Clamp 5000 lbs S/A LH Surface Mount Externally Plumbed Lower Flange UPC #662536373876Special Price $1,095.53 was $1,227.48