100872-Hytec-Fluid-Advance-Work-Supports-1,300-lbs.-Capacity-UPC#662536236348

100872 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC#662536236348

100876 Hytec Air Advance Work Supports 1,300 lbs. Capacity UPC #662536238106

100876 Hytec Air Advance Work Supports 1,300 lbs. Capacity UPC #662536238106

100873 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC#662536236560

Part #100873 Fluid Advance Work Supports 1,300 lbs. capacity at 5, 000 psi maximum Fully corrosion resistant construction Manifold mount or conventional base mounting, Filtered breather/rest button.
Special Price $742.71 was $834.51
SKU
100873
100873 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC#662536236560 is available to buy in increments of 1

Part #100873 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity

Hytec’s fluid advance work supports have a spring loaded plunger which hydraulically extends to contact the workpiece. To support any externally applied loads, the sleeve surrounding the plunger grips the plunger and holds it in place.

Fluid advance work supports allow the plunger to be retracted out of the way during workpiece load/unload operations. The work support provides its own internal sequencing of a piston which gently raises the plunger until it contacts the workpiece. A spring between the piston and the plunger limits the workpiece contact force.

The 100872’s threaded body may be compactly manifold mounted in your fixture or choose the 100873 which includes the100872 work support and a mounting base for installation on a flat surface for conventionally plumbed circuits. Both feature fully corrosion resistant construction.

Extremely close manufacturing tolerances hold the plunger perpendicular to the workpiece and eliminates inaccuracies due to plunger movement during lock-up. After lock-up, the plunger is absolutely rigid and limits elastic deflection to 0.00007" per 100 lbs. of load. For base only, order number 500035.


Features:

  • 1,300 lbs. capacity @ 5,000 psi maximum
  • Fully corrosion resistant construction
  • Manifold or conventional base mounting
  • Filtered breather/rest button
  • 1,000 psi minimum recommended pressure

 

Order NO. Cap. *
(lbs.)
Oil Cap.
(cu. in.)
Max.
Flow Rate
(cu. in./min.)
Advance
System
Mounting
Configuration
100873

1,300 0.04 47 Fluid Base Conventional
* Based on 5,000 psi max. operating pressure

 

FLUID ADVANCE WORK SUPPORT
Order NO. Approximate Forces Required
To Depress Plunger (lbs.)
Fully
Extended
Fully
Depressed
100873 2.3 2.9

 

 

Order
No.
Dimensions (In Inches)
A B †
Seal
Dia.
C D E
Hex.
F
Dia.
100873 1 1/4 - 16 UN - - - - 0.735

 

Order
No.
 
G
Hex.
Operating Range K L
Seal
H J
100873 0.688 - - - -

 

 

Order
No.
Dimensions (In Inches)
G
Hex.
100873 0.688

 

 

Order
No.
Mounting Dimensions (In Inches)
AA
Thread
Size
BB
Min.
Thread
CC DD
Dia.
EE
Drill Point
Dia. Max.
FF
Dia.
GG
Max.
100873 - - - - - - -

 

 

Order
No.
Mounting Dimensions (In Inches)
HH JJ KK
Thread
Size
LL MM NN
Pressure Port
Dia. Max.
100873 1.968 1.188 1/4 - 20 UNC 1.456 0.594 -
More Information
Manufacturer SPX Hytec
Write Your Own Review
You're reviewing:100873 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC#662536236560
More from SPX Hytec