110123 Hytec Fluid Advance Work Supports 4,000 lbs. Capacity UPC #662536372558
Part #110122 Hytec Hytec Fluid Advance Work Supports 1,300 lbs. Capacity
Hytec’s fluid advance work supports have a spring loaded plunger which hydraulically extends to contact the workpiece. To support any externally applied loads, the sleeve surrounding the plunger grips the plunger and holds it in place.
Fluid advance work supports allow the plunger to be retracted out of the way during workpiece load/unload operations. The work support provides its own internal sequencing of a piston which gently raises the plunger until it contacts the workpiece. A spring between the piston and the plunger limits the workpiece contact force.
The 100872’s threaded body may be compactly manifold mounted in your fixture or choose the 100873 which includes the100872 work support and a mounting base for installation on a flat surface for conventionally plumbed circuits. Both feature fully corrosion resistant construction.
Extremely close manufacturing tolerances hold the plunger perpendicular to the workpiece and eliminates inaccuracies due to plunger movement during lock-up. After lock-up, the plunger is absolutely rigid and limits elastic deflection to 0.00007" per 100 lbs. of load. For base only, order number 500035.
Features:
- 1,300 lbs. capacity @ 5,000 psi maximum
- Fully corrosion resistant construction
- Manifold or conventional base mounting
- Filtered breather/rest button
- 1,000 psi minimum recommended pressure
Order NO. | Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Max. Flow Rate (cu. in./min.) |
Advance System |
Mounting Configuration |
110122 |
1,300 | 0.04 | 47 | Fluid | Base Manifold |
* Based on 5,000 psi max. operating pressure |
Order No. |
Mounting Dimensions (In Inches) | ||||||
AA Thread Size |
BB Min. Thread |
CC | DD Dia. |
EE Drill Point Dia. Max. |
FF Dia. |
GG Max. |
|
110122 | - | - | - | - | - | - | - |
NOTE: |
Order No. |
Mounting Dimensions (In Inches) | |||||
HH | JJ | KK Thread Size |
LL | MM | NN Pressure Port Dia. Max. |
|
110122 | 1.968 | 1.188 | 1/4 - 20 UNC | 1.456 | 0.594 | 0.126 ††† |
NOTE: ††† Surface finish to be 63. Finish of 125 acceptable with concentric tool marks only. Finish area to be 0.438 dia. min. centered on 0.126 dia. port hole. See operating instructions for additional details. |
Manufacturer | SPX Hytec |
---|
-
110007 Hytec Swing/Pull Clamp Manifold Mount Upper Flange Style 365 lbs UPC #662536348843Special Price $834.73 was $937.90
-
110014 Hytec Swing Clamp 365LB S/A RH CART. UPC #662536348911Special Price $874.07 was $982.10
-
110011 Hytec Swing/Pull Clamp Manifold Mount Upper Flange Style 365 lbs UPC #662536348881Special Price $872.02 was $979.80
-
110130 Hytec Swing/Pull Clamp Threaded Body Style 365 lbs UPC #662536386128Special Price $926.76 was $1,041.30
-
110009 Hytec Swing/Pull Clamp Manifold Mount Upper Flange Style 365 lbs UPC #662536348867Special Price $565.74 was $633.88
-
110131 Hytec Swing/Pull Clamp Threaded Body Style 365 lbs UPC #662536386135Special Price $1,107.54 was $1,240.94
-
110010 Hytec Swing/Pull Clamp Manifold Mount Upper Flange Style 365 lbs UPC #662536348874Special Price $833.75 was $936.80