110122 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC #662536372008
Part #110122 Hytec Hytec Fluid Advance Work Supports 1,300 lbs. Capacity
Hytec’s fluid advance work supports have a spring loaded plunger which hydraulically extends to contact the workpiece. To support any externally applied loads, the sleeve surrounding the plunger grips the plunger and holds it in place.
Fluid advance work supports allow the plunger to be retracted out of the way during workpiece load/unload operations. The work support provides its own internal sequencing of a piston which gently raises the plunger until it contacts the workpiece. A spring between the piston and the plunger limits the workpiece contact force.
The 100872’s threaded body may be compactly manifold mounted in your fixture or choose the 100873 which includes the100872 work support and a mounting base for installation on a flat surface for conventionally plumbed circuits. Both feature fully corrosion resistant construction.
Extremely close manufacturing tolerances hold the plunger perpendicular to the workpiece and eliminates inaccuracies due to plunger movement during lock-up. After lock-up, the plunger is absolutely rigid and limits elastic deflection to 0.00007" per 100 lbs. of load. For base only, order number 500035.
Features:
- 1,300 lbs. capacity @ 5,000 psi maximum
- Fully corrosion resistant construction
- Manifold or conventional base mounting
- Filtered breather/rest button
- 1,000 psi minimum recommended pressure
Order NO. | Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Max. Flow Rate (cu. in./min.) |
Advance System |
Mounting Configuration |
110122 |
1,300 | 0.04 | 47 | Fluid | Base Manifold |
* Based on 5,000 psi max. operating pressure |
Order No. |
Mounting Dimensions (In Inches) | ||||||
AA Thread Size |
BB Min. Thread |
CC | DD Dia. |
EE Drill Point Dia. Max. |
FF Dia. |
GG Max. |
|
110122 | - | - | - | - | - | - | - |
NOTE: |
Order No. |
Mounting Dimensions (In Inches) | |||||
HH | JJ | KK Thread Size |
LL | MM | NN Pressure Port Dia. Max. |
|
110122 | 1.968 | 1.188 | 1/4 - 20 UNC | 1.456 | 0.594 | 0.126 ††† |
NOTE: ††† Surface finish to be 63. Finish of 125 acceptable with concentric tool marks only. Finish area to be 0.438 dia. min. centered on 0.126 dia. port hole. See operating instructions for additional details. |
Manufacturer | SPX Hytec |
---|
-
100279 Hytec Manual Pallet Coupling Pump 40-125 PSI UPC#662536005937Special Price $1,020.92 was $1,147.10
-
110061 Hytec UniForce Hydraulic Clamp, 1500 LB. Force 5000 PSI UPC #662536375221Special Price $254.49 was $285.14
-
100212-230 Hytec Manual Pallet Coupling Pump UPC#662536522632Special Price $8,108.60 was $9,110.79
-
110059 Hytec UniForce Hydraulic Clamp, 290 LB. Force 5000 PSI UPC #662536375207Special Price $219.48 was $245.92
-
110065 Hytec UniForce Hydraulic Clamp, 3500 LB. Force 5000 PSI UPC #662536375269Special Price $409.64 was $458.98
-
100212 Hytec Manual Pallet Coupling Pump UPC#662536496155Special Price $8,342.05 was $9,373.09
-
110062 Hytec UniForce Hydraulic Clamp, 1500 LB. Force 2500 PSI UPC #662536375238Special Price $254.49 was $285.14