100906 Hytec Swing Clamps Single-Acting Straight Pull Cartridge Style 5000 lbs UPC #662536277358

100906 Hytec Swing Clamps Single-Acting Straight Pull Cartridge Style 5000 lbs UPC #662536277358

110123 Hytec Fluid Advance Work Supports 4,000 lbs. Capacity UPC #662536372558

110123 Hytec Fluid Advance Work Supports 4,000 lbs. Capacity UPC #662536372558

110122 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC #662536372008

Part #110122 Hytec Fluid Advance Work Supports 1,300 lbs. capacity, 5, 000 psi maximum pressure, Manifold or conventional base mounting, Filtered breather/rest button.
Special Price $623.45 was $698.54
SKU
110122
110122 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC #662536372008 is available to buy in increments of 1

Part #110122 Hytec Hytec Fluid Advance Work Supports 1,300 lbs. Capacity


Hytec’s fluid advance work supports have a spring loaded plunger which hydraulically extends to contact the workpiece. To support any externally applied loads, the sleeve surrounding the plunger grips the plunger and holds it in place.

Fluid advance work supports allow the plunger to be retracted out of the way during workpiece load/unload operations. The work support provides its own internal sequencing of a piston which gently raises the plunger until it contacts the workpiece. A spring between the piston and the plunger limits the workpiece contact force.

The 100872’s threaded body may be compactly manifold mounted in your fixture or choose the 100873 which includes the100872 work support and a mounting base for installation on a flat surface for conventionally plumbed circuits. Both feature fully corrosion resistant construction.

Extremely close manufacturing tolerances hold the plunger perpendicular to the workpiece and eliminates inaccuracies due to plunger movement during lock-up. After lock-up, the plunger is absolutely rigid and limits elastic deflection to 0.00007" per 100 lbs. of load. For base only, order number 500035.



Features:

  • 1,300 lbs. capacity @ 5,000 psi maximum
  • Fully corrosion resistant construction
  • Manifold or conventional base mounting
  • Filtered breather/rest button
  • 1,000 psi minimum recommended pressure

 

Order NO. Cap. *
(lbs.)
Oil Cap.
(cu. in.)
Max.
Flow Rate
(cu. in./min.)
Advance
System
Mounting
Configuration
110122

1,300 0.04 47 Fluid Base Manifold
* Based on 5,000 psi max. operating pressure

 

 


Order
No.
Mounting Dimensions (In Inches)
AA
Thread
Size
BB
Min.
Thread
CC DD
Dia.
EE
Drill Point
Dia. Max.
FF
Dia.
GG
Max.
110122 - - - - - - -

NOTE:
††† Surface finish to be 63. Finish of 125 acceptable with concentric tool marks only.
Finish area to be 0.438 dia. min. centered on 0.126 dia. port hole.
See operating instructions for additional details.

 

 


Order
No.
Mounting Dimensions (In Inches)
HH JJ KK
Thread
Size
LL MM NN
Pressure Port
Dia. Max.
110122 1.968 1.188 1/4 - 20 UNC 1.456 0.594 0.126 †††
NOTE:
††† Surface finish to be 63. Finish of 125 acceptable with concentric tool marks only.
Finish area to be 0.438 dia. min. centered on 0.126 dia. port hole.
See operating instructions for additional details.
More Information
Manufacturer SPX Hytec
Write Your Own Review
You're reviewing:110122 Hytec Fluid Advance Work Supports 1,300 lbs. Capacity UPC #662536372008
More from SPX Hytec