110086 Hytec Air Advance Work Supports - 2,100 lbs. Capacity UPC #662536364942
Part #110086 Hytec Air Advance Work Supports - 2,100 lbs. Capacity, Air advance, Single-acting, Manifold or conventionally mounted styles, Sealed against contamination.
Special Price
$490.05
was
$549.08
SKU
110086
110086 Hytec Air Advance Work Supports - 2,100 lbs. Capacity UPC #662536364942 is available to buy in increments of 1
Part #110086 Hytec Air Advance Work Supports - 2,100 lbs. Capacity
Work supports provide the stability that prevents deflection and vibration of the workpiece during machining. Automatically adjustable to varying sizes or positions of the workpieces, they are also usable as adjustable rest pads under clamps.
These 2,100 lb. air advanced work supports are available in three different models with either conventional or manifold mounting. All use plunger seals to protect against contamination.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Features:
- Air advance
- 2,100 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Manifold or conventionally mounted styles
- Sealed against contamination
Order No. | Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
110086 | 2,100 | 0.100 | Air | Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. | Dimensions (In Inches) |
||||||
A Retract Operating Range |
B Advance Operating Range |
C | D | J | N |
P Air Inlet |
|
110086 | 2.250 | 2.625 | 2.250 | 3.542 | 0.875 | 0.685 | 1/8 NPTF |
Order No. | Dimensions (In Inches) | |||
E | G Dia. |
L | Q Port |
|
110086 | 1.750 | 0.500 | 1.375 | 7/16-20 UNF SAE-4 |
Order No. |
Dimensions (In Inches) | |||||
F | H | K |
M Thread |
R Dia. |
||
Size | Depth | |||||
110086 | 0.875 | 0.438 | 0.625 | 1/4-20 UNC | 0.312 | 0.281 |
Order No. | Dimensions (In Inches) | |||||
S | T | U |
V Thread |
W Dia. Air |
Y Dia. |
|
110086 | - | - | - | - | - | - |
Order No. | Dimensions (In Inches) | |
Y | Z | |
110086 | - | - |
AIR ADVANCE WORK SUPPORT | ||
Order No. | Approximate Forces Required To Depress Plunger (lbs.) |
|
Air Pressure * (psi) |
Force (lbs.) |
|
110086 | 50 | 7.1 |
NOTE: * Min. air pressure 25 psi, maximum air pressure 50 psi. |
Manufacturer | SPX Hytec |
---|
Write Your Own Review
More from SPX Hytec
-
350917 Hytec Swing-Pull Clamp Accessories UPC #662536162845Special Price $66.70 was $74.73
-
500188 Hytec Uniforce Clamp For 110067 OR 110068 UPC#662536375139Special Price $405.57 was $455.70
-
500187 Hytec Uniforce Clamp For 110065 OR 110066 UPC#662536375122Special Price $111.63 was $125.08
-
500177 Hytec Mounting Bracket For Accumulators UPC #662536338622Special Price $175.06 was $196.70
-
350915 Hytec Swing-Pull Clamp Accessories UPC #662536162821Special Price $1,307.44 was $1,464.92
-
500186 Hytec Uniforce Clamp For 110063 OR 110064 UPC#662536375115Special Price $183.16 was $205.80
-
350916 Hytec Swing-Pull Clamp Accessories UPC #662536162838Special Price $64.05 was $71.76