100882 Hytec Fluid Advance Work Supports 4,000 lbs. Capacity UPC #662536254090
Part #100882 Hytec Fluid Advance Work Supports 4,000 lbs. Capacity
Hytec’s fluid advance work supports have a spring loaded plunger which hydraulically extends to contact the workpiece. To support any externally applied loads, the sleeve surrounding the plunger grips the plunger and holds it in place.
Fluid advance work supports allow the plunger to be retracted out of the way during workpiece load/unload operations. The work support provides its own internal sequencing of a piston which gently raises the plunger until it contacts the workpiece. A spring between the piston and the plunger limits the workpiece contact force.
The 100882’s threaded body may be compactly manifold mounted in your fixture or choose the No. 100883 which includes the 100882 work support and a mounting base for installation on a flat surface for conventionally plumbed circuits. Both feature fully corrosion resistant construction.
Extremely close manufacturing tolerances hold the plunger perpendicular to the workpiece and eliminate inaccuracies due to plunger movement during lock-up. After lock-up, the plunger is absolutely rigid and limits elastic deflection to 0.00004" per 100 lbs. of load. For base only, order number 500028 for conventional mounting, and 421728 for manifold mounting.
Features:
- 4,000 lbs. capacity @ 5,000 psi maximum
- Fully corrosion resistant construction
- Manifold mount or conventional base mounting
- Small, filtered breather/rest button to accommodate intricate workpieces
- 1,000 psi minimum recommended pressure
FLUID ADVANCE WORK SUPPORT | ||
Order NO. | Approximate Forces Required To Depress Plunger (lbs.) |
|
Fully Extended |
Fully Depressed |
|
100882 | 4 | 8 |
Order No. |
Dimensions (In Inches) | |||||
A | B † Seal Dia. |
C | D | E Hex. |
F Dia. |
|
100882 | 2 1/4 - 16 UN | 2.140 | 0.250 | 1.625 | 2.000 | 0.735 |
† Seal included. |
Order No. |
Dimensions (In Inches) | |||
Operating Range | K | L Seal |
||
H | J | |||
100882 | 3.265 | 3.765 | 2.312 | 0.040 |
Order No. |
Dimensions (In Inches) |
G Hex. |
|
100882 | 0.688 |
Order No. |
Mounting Dimensions (In Inches) | ||||||||
AA Thread Size |
BB Min. Thread |
CC | DD Dia. |
EE Drill Point Dia. Max. |
FF Dia. |
GG Max. |
HH | JJ Max. |
|
100882 | 2 1/4 - 16 UN | 0.380 | 0.560 0.580 |
2.182 2.196 |
0.500 | 0.080 0.100 |
2.145 2.155 |
0.121 0.293 |
0.700 |
Order No. |
Mounting Dimensions (In Inches) | |||||
KK | LL | MM Thread Size |
NN | PP | RR Pressure Port Dia. Max. |
|
100882 | - | - | - | - | - | - |
Manufacturer | SPX Hytec |
---|
-
100978 Hytec Double Acting Swing/Pull Clamp Manifold Mount Upper Flange Style UPC #662536334389Special Price $602.63 was $675.22
-
100954 Hytec Single Acting Swing/Pull Clamp Manifold Mount Upper Flange Style UPC #662536296380Special Price $664.12 was $746.20
-
100989 Hytec Swing/Pull Clamps Double-Acting Cartridge Style 5000 lbs UPC #662536356930Special Price $1,215.30 was $1,365.50
-
100955 Hytec Single Acting Swing/Pull Clamp Manifold Mount Upper Flange Style UPC #662536296397Special Price $664.12 was $746.20
-
100956 Hytec Single Acting Swing/Pull Clamp Manifold Mount Upper Flange Style UPC #662536296403Special Price $778.84 was $875.10