100844 Hytec Air Advance Work Supports 7,500 lbs. Capacity UPC #662536141116
Part #100844 Air Advance Work Supports 7,500 lbs. Capacity
Similar in operation to our other air advance work supports, Hytec’s 7,500 lb. work supports‘ unique interlocking pin design gives more holding capacity than other units of similar size.
The block style design requires only a flat surface for mounting rather than the large threaded hole necessary with threaded body designs.
Air advance work supports may be specified in applications whenever the workpiece is loaded from the side and the extended plunger from a spring advance work support would be in the way, or the workpiece is not heavy enough to depress a spring advance work support plunger, or the plunger contact force must be precisely adjusted and controlled. Adjusting the air supply pressure will vary the workpiece contact force.
Features:
- Air advance
- 7,500 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Sealed against contamination
- Convenient dual air inlets allow easy connection and chaining of work supports
Note:
See Crowned Threaded Inserts
See Air Inlet Adapter Fitting
Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
100844 | 7,500 | 0.250 | Air | Conventional |
* Based on 5,000 psi maximum operating pressure |
Order No. |
Dimensions (In Inches) | |||||
A Retract Operating Range |
B Advance Operating Range |
C | D | O | P Air Inlet Port |
|
100844 | 3.435 | 4.185 | 3.500 | 3.875 | 0.830 | 1/16 NPTF |
Order No. |
Dimensions (In Inches) | ||||
E | G Dia. |
L | R Port |
S Flats |
|
100844 | 3.250 | 0.500 | 1.500 | 1/4 NPTF | 0.875 |
Order No. |
Dimensions (In Inches) | |||||||
F | H | J | K | M | N | Q | ||
Size | Depth | |||||||
100844 | 0.875 | 0.438 | 0.875 | 0.625 | 1/2-13 UNC | 0.625 | 1.750 | 0.406 |
AIR ADVANCE WORK SUPPORT | ||
Order No. |
Approximate Plunger Extension Force |
|
Air Pressure * (psi) |
Force (lbs.) |
|
100844 | 30 | 8.0 |
NOTE: * Min. air pressure 25 psi, maximum air pressure 100 psi. |
Manufacturer | SPX Hytec |
---|
-
100957 Hytec Swing/Pull Clamps - Cartridge Style - 750 lbs UPC#662536296212Special Price $644.45 was $724.10
-
100859 Hytec Single-Acting Swing/Pull Clamps - Cartridge Style - 2400 lbs UPC#662536220286Special Price $833.75 was $936.80
-
100868 Hytec Single-Acting Swing/Pull Clamps - Cartridge Style - 2400 lbs UPC#662536229944Special Price $628.18 was $703.84
-
100958 Hytec Swing/Pull Clamps - Cartridge Style - 750 lbs UPC#662536296229Special Price $694.11 was $779.90
-
100959 Hytec Swing/Pull Clamps - Cartridge Style - 750 lbs UPC#662536296236Special Price $689.67 was $772.74
-
100960 Hytec Double-Acting Swing/Pull Clamps - Cartridge Style - 2400 lbs UPC#662536301091Special Price $653.72 was $732.46
-
100961 Hytec Double-Acting Swing/Pull Clamps - Cartridge Style - 2400 lbs UPC#662536301183Special Price $833.75 was $936.80