Hytec Spring Advance Work Support, 1100 lb Capacity [100207]
Brand:
SPX HYTECSKU:
100207
$1,212.47
Part #Hytec Spring Advance Work Support, 1100 lb Capacity [100207]
Free standard ground shipping on orders over $1,000*
WORRY FREE GUARANTEE
Have an issue? Call or email us right away and we will get it handled to your satisfaction.
LIVE CHAT
Our customer support agent is ready to assist you during business hours.
Hytec Spring Advance Work Support, 1100 lb Capacity [100207]
Hytec's 1,100 lb. capacity work supports use a boot attached between the body and plunger to effectively seal out contaminants. A diaphragm breather system further protects internal components, and the block style design requires only a flat surface for mounting rather than the large threaded hole needed with threaded body designs. Two mounting styles are available for plumbing convenience: manifold and conventional mount.
These work supports use a spring-loaded plunger to minimize deflection and vibration: As the workpiece is loaded into the fixture, it contacts the plunger, and its weight or the design of the fixture holds the plunger depressed. When the work support is hydraulically pressurized, the plunger is locked into position.
Features:
- Spring advance
- 1,100 lb. rated capacity at 5,000 psi maximum
- Single-acting
- Manifold or conventionally mounted styles
- Sealed against contamination
Order No. |
Cap. * (lbs.) |
Oil Cap. (cu. in.) |
Advance System |
Mounting Configuration |
| 100207 | 1,100 | 0.07 | Spring | Conventional |
| * Based on 5,000 psi maximum operating pressure | ||||
Order No. |
Dimensions (In Inches) | |||
|
A Retract Operating Range |
B Advance Operating Range |
D |
N Hex. |
|
| 100207 | 2.375 | 2.670 | 2.500 | 1.500 |
Order No. |
Dimensions (In Inches) | |||||
| C | E | G | L | X | ||
| Thread Size |
Dia. | |||||
| 100207 | 2.250 | 1.750 | 0.375 | 1.375 | 1/8 NPTF | - |
Order No. |
Dimensions (In Inches) | ||||||
| F | H | J | K |
M Thread
|
T Dia. |
||
| Size | Depth | ||||||
| 100207 | 0.875 | 0.438 | 0.730 | 0.625 | 10-24 UNC | 0.250 | 0.281 |
Order No. |
SPRING ADVANCE WORK SUPPORT | ||
| Approximate Forces Required To Depress Plunger (lbs.) |
|||
| Fully Extended |
Extended 50% |
Fully Depressed |
|
| 100207 | 1.0 | 1.4 | 1.8 |
| Item Type | Accessories / Tools |
|---|---|
| Manufacturer | SPX Hytec |
Write Your Own Review
